A beam splitteris an optical device that splits a beam of light in two. It is the crucial part of most interferometers.In its most common form, a cube, it is made from two triangular glass prisms which are glued together at their base using polyester, epoxy, or urethane-based adhesives. The thickness of the resin layer is adjusted such that (for a certain wavelength) half of the light incident through one "port" (i.e., face of the cube) is reflected and the other half is transmitted due tofrustrated total internal reflection.
Specifications of beam splitter prism:
Material: BK7 Grade A optical glass Dimension Tolerance: +/- 0.25 mm 90°, 180°Deviation Tolerance: Standard series: < 30 arc seconds Precision series: up to 15 arc seconds Standard series: l/2 at 632.8 nm Precision series: up to l/4 at 632.8 nm Surface Quality: 60-40 scratch and dig Beamsplitter Ratio T/R: @ 630-680nm, T/R: 20/80 ±5
We will process as the drawings and requirements rigorously.
Our engineer will check or design the drawings according to the details.
In addition,we have some stock lenses for your option
preparing toolings and models,
Cleaning the lenses,
Packing and Delivery
We will use protective plastic and customized boxed to pack.(Enviroment friendly material)
We could do customized packing according to the quantity.
We will make a planning according the actual products.
Samples will delivery within 15 to 20 days.
5000pcs will delivery within 30 days.
Over 5000pcs or 10,000pcs will delivery in partial within 50 days.
Advice and discussion are very important
Our Customer service will track the product processing until you received the goods and verify the product quality.
Professional engineers and application specialists respond to your requests efficiently
Online via SKYPE:emma-realpoo, Also through mail, voice phone, message and fax if network is not accessible for customer
Follow up the case, record the entire process. Solution will be provide with 24 hours. Meanwhile,the problem complaint will be reported to QC department. QC will find defect from which department ,who is in charge to identify responsibility. Collecting and record customer respond , suggestion, requirement
Customer Service Center (International) From Monday to Saturday between 08:00-17:30 hours (Beijing Time)